Sheridan provides a complete range of accessories. We offer Platform Seating in a wide variety of options available to customize to your preference. Sheridan has what you need to accessorize the Gymnasium as well, with floor sockets, game posts and divider curtains to name a few. If you do not see what you require contact us. We are sure that we will be able to meet your requirements. All accessories meet NFPA102 codes.
A series of electric drives are located under the first row in sufficient quantities necessary to move the system in and out effortlessly. Each tractor drive consists of two 12” wide x 6” diameter cylinder wheels covered with a specially formulated white 60 durometer soft-faced rubber grooved for positive grip and low wear while reducing stress on floor. The tractor is operated by a minimum ½” HP gear reduction motor built into a height adjustable steel framework and containing additional weight plates for added traction where necessary. Our drive is the strongest in the industry able to push or pull 5,000 to 8,000 lbs. depending on motor and gearing. These drives operate from the hand-held pendant control (see image).
The friction drive system operates from one central control box and a single plug-in, hand-held, low-voltage remote pendant controller which has, in addition to an in-and-out button, a left and a right jog button used to always allow for straight and true steering (steering provided where required). The standard system operates with 3 phase, 208 volt, 60 Hz power. Optional power source can be supplied as required.
The hydraulic lift cart allows easy movement of portable bleachers. It has built in hydraulic pump lifts which engages the swivel wheel allowing movement, permitting multiple configurations and remote storage.
The bleacher mule is a safe and economical way for one person to bring manually operated bleachers in and out. The mule permits one person to open and close manual sections of the bleacher by moving the tractor from section to section. It operates on standard 115 volt 20 amp service.
The operator handle is used to open and close manual bleachers. The operator handle is standard equipment that comes with manual bleachers and is easy to use. Simply hook the handle under the first row and move the manual bleacher section in or out. No need to bend and hurt your back.
Available in a wide variety of fabrics and colours, the fully upholstered deck mount chair offers a comfortable seat. Chair options include armrests, number and letter plates, folding writing tablets and cup holders.
This unique nose mount style chair allows for additional seat padding for maximum comfort. It is available in a wide variety of fabrics and colours. Chair options include armrests, number and letter plates, folding writing tablets and cup holders.
Available in a variety of colours and styles to suit the client’s needs, the plastic chair offers ergonomic construction with optimal comfort. This picture shows deck mount chairs with semi-automatic fold down device.
Sheridan’s Semi-Automatic Fold Down Device is another available option for telescopic seating platforms. The device folds the chairs down before closing the platform seating.
Sheridan has End Curtains which cover up the open space on the end of the bleacher giving the bleachers a nice finished look .
The Delay Action Frame is an option that will ensure another measure of safety for your bleacher platform by creating a time lag before the bleachers open or close.
Click the Image for PDF Diagram
Sheridan has the Safety Rails you need to complete your project. Check out our line of Removable Rails, End Rails and ADA Rails designed to meet all national and local code requirements.
Sturdy, non-removable self-storing rail for the ends of the bleacher platform. Meets all codes on self-storing end rails. Sheridan also provides removable end rails where space is critical such as in a pocket or underneath an overhang.
Two styles to choose from. Sheridan has the most user friendly centre rails. No removal required. The picture shows our classic style with push button operation. Our new style does not have the push button, just pick up and turn for ease of use. Meets all code requirements for hand rails on aisles. Removable style available.
Back Rails are used on Portable & Reverse Fold bleachers and anywhere else that the bleacher is not directly against the wall.
The NRADA is permanently attached to prevent falls from the deck behind the permanent ADA seating. All of our ADA Rails meet required American Disabilities Act codes.
This rail is used for ADA spaces that are recoverable when required for regular seating. The rail is removable and the ADA space converts to regular seating.
Sheridan’s Row Lock is operated by gravity, no springs needed. The row locking mechanism permits securement of any row in user position. It operates only upon the unlocking and moving of the first row.
SS600 Single Wall Electric Fold Up Curtain
SS650 Double Wall Electric Fold Up Curtain
S550 Walk-Draw Curtain with lower 10′ polyester/vinyl and upper section nylon mesh
S550 Walk-Draw Curtain all vinyl/polyester
Centre Roll Divder Curtain
Sheridan’s Electric Fold Up Curtain can be installed onto any existing truss. The curtain raises and lowers electrically by activating key operated switch. It is available in 18 oz to 50 oz vinyl fabric. S102.2 and S109 fire and smoke rated materials. It is also available in single and double wall models.
The S550 is the most economical of all dividing curtains to purchase and maintain. It can easily be operated and stacked in the smallest of building recesses or flat against the wall. Easily stacked between bleacher sections if 18″ separation is available. The curtains can be combination vinyl and net or all vinyl.
The Walk-Draw Curtain: Model S550 is manufactured by Sheridan. The curtain can be vinyl and nylon mesh. The lower section is 10′-0″ high of 20 oz polyester/vinyl reinforced with upper section consisting of nylon mesh.
The Walk-Draw Model S550 curtain can also be all vinyl/polyester reinforced 20 oz. It’s hem top and bottom with grommets on 12″ centres along the top. The material carries appropriate fire and smoke ratings. Colour as selected by Architect from manufacturer’s standard selection. Track system to be extruded aluminum double I-beam curvable track. The carriers are to be steel block constructed ball bearing, nylon wheels, spaced 12″ O.C. with swivel action.
The Aut-O-Loc is industry standard for overhead gymnasium safety. The safety belt is the ideal safeguard to keep folded basketball backstops from accidentally falling and causing injury to spectators and players. A fully automatic reset eliminates the need for handles, ropes, levers or buttons. It also features positive locking that is set by inertial and/or centrifugal force. Complete with 35 feet of belting which has been tested to 1500 pounds of free fall load, and a universal mounting bracket for ease of installation.
The Aut-O-Loc Safety Strap is also used on the Retractable Stages and the Electric Fold Curtains
Special Features of Aut-O-Loc
The Aut-O-Loc is uniquely engineered to provide two-fold protection in the event of a backstop fall. First, the patented inertia plate senses the centrifugal force of a fall. Then it engages three unique steel pawls that each lock into the teeth of the cast housing. It instantly stops the load before it gains momentum, damages the gymnasium structure, or, worse, injures players and spectators.
Our 16″ x 96″ convenient and portable scorer’s table can be conveniently moved for game conditions and storage. Perfect for a wide variety of venues and social events.
This model is a manually operated winch fitted with automatic self-locking worm gears, fully enclosed for safety. It will hold at any desired point between fully up and fully down. It is also fitted with a roller type grip, removable winding crank handle.
This model is a fast and safe way to raise and lower basketball backstops. The electric winch is mounted directly on the backstop eliminating the need for unsightly cable or wall mounted winches.
-Sheridan’s Standard Combination Posts are constructed of steel.
-1 1/2 ” (1.9 OD) or 2″ (2 3/8″OD) steel or 3″ (3″ OD) powder coated finish.
-Nets and Referee Stands Available Upon Request
These units simply drop into the floor socket, requiring no anchors or cables. Two non-marking castors make storing easy. Spring loaded adjustments allow for five settings even while net is attached. Nets available for all posts.
A deep brass floor socket designed for use with the 3″/78mm volleyball posts. It is precision machined finish .035 clearance
A new concept in volleyball sockets for floating floors. This special design eliminates any cork inlay, by separating the flange and lid from the deep socket. As expansion and contraction take place, complete freedom of movement is given to the floating floor. A three part socket consisting of a corrosion resistant brass lid and flange, and a heavy duty plated steel socket to receive 1.9″ O.D., 2 3/8″ O.D. or 3″ Posts. Precision machined finish .035 clearance.
The SFS315 is designed for use in floating floors. This model is for use with parallel, high and uneven bars.
Deep high bar, and Olympic uneven parallel bar floor plate sockets. Tested at 1500 lbs. tension. For use with parallel, high and uneven bars. Note: Posts and Sockets must be compatible with the model.
Sheridan precision machined Floor Sockets are available for standard or floating floor installations. Deep floor sockets designed for use with volleyball and badminton posts and Hook Sockets for use with parallel, high and uneven bars.
A deep brass floor socket designed for use with the 1.9″/50mm volleyball and badminton posts. It is precision machined finish .035 clearance.
A deep brass floor socket designed for use with the 2 3/8″/60mm volleyball & badminton posts. It is precision machined finish .035 clearance.
A deep brass floor socket designed for use with the 3″/78mm volleyball posts. It is precision machined finish .035 clearance
A new concept in volleyball sockets for floating floors. This special design eliminates any cork inlay, by separating the flange and lid from the deep socket. As expansion and contraction take place, complete freedom of movement is given to the floating floor. A three part socket consisting of a corrosion resistant brass lid and flange, and a heavy duty plated steel socket to receive 1.9″ O.D., 2 3/8″ O.D. or 3″ Posts. Precision machined finish .035 clearance.
The SFS315 is designed for use in floating floors. This model is for use with parallel, high and uneven bars.
Deep high bar, and Olympic uneven parallel bar floor plate sockets. Tested at 1500 lbs. tension. For use with parallel, high and uneven bars. Note: Posts and Sockets must be compatible with the model.
A series of electric drives are located under the first row in sufficient quantities necessary to move the system in and out effortlessly. Each tractor drive consists of two 12” wide x 6” diameter cylinder wheels covered with a specially formulated white 60 durometer soft-faced rubber grooved for positive grip and low wear while reducing stress on floor. The tractor is operated by a minimum ½” HP gear reduction motor built into a height adjustable steel framework and containing additional weight plates for added traction where necessary. Our drive is the strongest in the industry able to push or pull 5,000 to 8,000 lbs. depending on motor and gearing. These drives operate from the hand-held pendant control (see image).
The friction drive system operates from one central control box and a single plug-in, hand-held, low-voltage remote pendant controller which has, in addition to an in-and-out button, a left and a right jog button used to always allow for straight and true steering (steering provided where required). The standard system operates with 3 phase, 208 volt, 60 Hz power. Optional power source can be supplied as required.
The hydraulic lift cart allows easy movement of portable bleachers. It has built in hydraulic pump lifts which engages the swivel wheel allowing movement, permitting multiple configurations and remote storage.
The bleacher mule is a safe and economical way for one person to bring manually operated bleachers in and out. The mule permits one person to open and close manual sections of the bleacher by moving the tractor from section to section. It operates on standard 115 volt 20 amp service.
The operator handle is used to open and close manual bleachers. The operator handle is standard equipment that comes with manual bleachers and is easy to use. Simply hook the handle under the first row and move the manual bleacher section in or out. No need to bend and hurt your back.
Available in a wide variety of fabrics and colours, the fully upholstered deck mount chair offers a comfortable seat. Chair options include armrests, number and letter plates, folding writing tablets and cup holders.
This unique nose mount style chair allows for additional seat padding for maximum comfort. It is available in a wide variety of fabrics and colours. Chair options include armrests, number and letter plates, folding writing tablets and cup holders.
Available in a variety of colours and styles to suit the client’s needs, the plastic chair offers ergonomic construction with optimal comfort. This picture shows deck mount chairs with semi-automatic fold down device.
Sheridan’s Semi-Automatic Fold Down Device is another available option for telescopic seating platforms. The device folds the chairs down before closing the platform seating.
Sheridan has End Curtains which cover up the open space on the end of the bleacher giving the bleachers a nice finished look .
The Delay Action Frame is an option that will ensure another measure of safety for your bleacher platform by creating a time lag before the bleachers open or close.
Click the Image for PDF Diagram
Sheridan has the Safety Rails you need to complete your project. Check out our line of Removable Rails, End Rails and ADA Rails designed to meet all national and local code requirements.
Sturdy, non-removable self-storing rail for the ends of the bleacher platform. Meets all codes on self-storing end rails. Sheridan also provides removable end rails where space is critical such as in a pocket or underneath an overhang.
Two styles to choose from. Sheridan has the most user friendly centre rails. No removal required. The picture shows our classic style with push button operation. Our new style does not have the push button, just pick up and turn for ease of use. Meets all code requirements for hand rails on aisles. Removable style available.
Back Rails are used on Portable & Reverse Fold bleachers and anywhere else that the bleacher is not directly against the wall.
The NRADA is permanently attached to prevent falls from the deck behind the permanent ADA seating. All of our ADA Rails meet required American Disabilities Act codes.
This rail is used for ADA spaces that are recoverable when required for regular seating. The rail is removable and the ADA space converts to regular seating.
Sheridan’s Row Lock is operated by gravity, no springs needed. The row locking mechanism permits securement of any row in user position. It operates only upon the unlocking and moving of the first row.
SS600 Single Wall Electric Fold Up Curtain
SS650 Double Wall Electric Fold Up Curtain
S550 Walk-Draw Curtain with lower 10′ polyester/vinyl and upper section nylon mesh
S550 Walk-Draw Curtain all vinyl/polyester
Centre Roll Divder Curtain
Sheridan’s Electric Fold Up Curtain can be installed onto any existing truss. The curtain raises and lowers electrically by activating key operated switch. It is available in 18 oz to 50 oz vinyl fabric. S102.2 and S109 fire and smoke rated materials. It is also available in single and double wall models.
The S550 is the most economical of all dividing curtains to purchase and maintain. It can easily be operated and stacked in the smallest of building recesses or flat against the wall. Easily stacked between bleacher sections if 18″ separation is available. The curtains can be combination vinyl and net or all vinyl.
The Walk-Draw Curtain: Model S550 is manufactured by Sheridan. The curtain can be vinyl and nylon mesh. The lower section is 10′-0″ high of 20 oz polyester/vinyl reinforced with upper section consisting of nylon mesh.
The Walk-Draw Model S550 curtain can also be all vinyl/polyester reinforced 20 oz. It’s hem top and bottom with grommets on 12″ centres along the top. The material carries appropriate fire and smoke ratings. Colour as selected by Architect from manufacturer’s standard selection. Track system to be extruded aluminum double I-beam curvable track. The carriers are to be steel block constructed ball bearing, nylon wheels, spaced 12″ O.C. with swivel action.
The Aut-O-Loc is industry standard for overhead gymnasium safety. The safety belt is the ideal safeguard to keep folded basketball backstops from accidentally falling and causing injury to spectators and players. A fully automatic reset eliminates the need for handles, ropes, levers or buttons. It also features positive locking that is set by inertial and/or centrifugal force. Complete with 35 feet of belting which has been tested to 1500 pounds of free fall load, and a universal mounting bracket for ease of installation.
The Aut-O-Loc Safety Strap is also used on the Retractable Stages and the Electric Fold Curtains
Special Features of Aut-O-Loc
The Aut-O-Loc is uniquely engineered to provide two-fold protection in the event of a backstop fall. First, the patented inertia plate senses the centrifugal force of a fall. Then it engages three unique steel pawls that each lock into the teeth of the cast housing. It instantly stops the load before it gains momentum, damages the gymnasium structure, or, worse, injures players and spectators.
Our 16″ x 96″ convenient and portable scorer’s table can be conveniently moved for game conditions and storage. Perfect for a wide variety of venues and social events.
This model is a manually operated winch fitted with automatic self-locking worm gears, fully enclosed for safety. It will hold at any desired point between fully up and fully down. It is also fitted with a roller type grip, removable winding crank handle.
This model is a fast and safe way to raise and lower basketball backstops. The electric winch is mounted directly on the backstop eliminating the need for unsightly cable or wall mounted winches.
-Sheridan’s Standard Combination Posts are constructed of steel.
-1 1/2 ” (1.9 OD) or 2″ (2 3/8″OD) steel or 3″ (3″ OD) powder coated finish.
-Nets and Referee Stands Available Upon Request
These units simply drop into the floor socket, requiring no anchors or cables. Two non-marking castors make storing easy. Spring loaded adjustments allow for five settings even while net is attached. Nets available for all posts.
A deep brass floor socket designed for use with the 3″/78mm volleyball posts. It is precision machined finish .035 clearance
A new concept in volleyball sockets for floating floors. This special design eliminates any cork inlay, by separating the flange and lid from the deep socket. As expansion and contraction take place, complete freedom of movement is given to the floating floor. A three part socket consisting of a corrosion resistant brass lid and flange, and a heavy duty plated steel socket to receive 1.9″ O.D., 2 3/8″ O.D. or 3″ Posts. Precision machined finish .035 clearance.
The SFS315 is designed for use in floating floors. This model is for use with parallel, high and uneven bars.
Deep high bar, and Olympic uneven parallel bar floor plate sockets. Tested at 1500 lbs. tension. For use with parallel, high and uneven bars. Note: Posts and Sockets must be compatible with the model.
Sheridan precision machined Floor Sockets are available for standard or floating floor installations. Deep floor sockets designed for use with volleyball and badminton posts and Hook Sockets for use with parallel, high and uneven bars.
A deep brass floor socket designed for use with the 1.9″/50mm volleyball and badminton posts. It is precision machined finish .035 clearance.
A deep brass floor socket designed for use with the 2 3/8″/60mm volleyball & badminton posts. It is precision machined finish .035 clearance.
A deep brass floor socket designed for use with the 3″/78mm volleyball posts. It is precision machined finish .035 clearance
A new concept in volleyball sockets for floating floors. This special design eliminates any cork inlay, by separating the flange and lid from the deep socket. As expansion and contraction take place, complete freedom of movement is given to the floating floor. A three part socket consisting of a corrosion resistant brass lid and flange, and a heavy duty plated steel socket to receive 1.9″ O.D., 2 3/8″ O.D. or 3″ Posts. Precision machined finish .035 clearance.
The SFS315 is designed for use in floating floors. This model is for use with parallel, high and uneven bars.
Deep high bar, and Olympic uneven parallel bar floor plate sockets. Tested at 1500 lbs. tension. For use with parallel, high and uneven bars. Note: Posts and Sockets must be compatible with the model.